Outdoor Solar Ultrasonic Animal Repeller Repellent Pest Cat Dog Mice Deer Sensor

Description

Welcome to ht_lifestyle2019
Features:
Effective: The strong ultrasonic signal keeps dogs, cats, wild boars, mice, birds and other animals more away from your area, house, garden or yard.
Coverage area: The sensor can detect movement within an arc of 110 degrees and a distance of up to 16 feet. When the animal enters the area, the PIR is activated, and ultrasonic waves are emitted at a frequency of 25-61 Hz for 5 seconds to get the animal out.
Safe and environmentally friendly: There are no chemical components that threaten human health. Passive infrared sensors (PIR) can detect movement and trigger, and then the ultrasonic speaker emits a tone that is inaudible but will drive away common outdoor pests.
Storable energy: It is powered by solar energy converted into electric energy. It contains a battery that can store electricity. The capacity is 800 mA. It usually takes 6 to 10 hours to fully charge it to protect your garden all night.
Easy to install: It can be installed on the ground together with the attached spikes, or hung on the wall through the rear slot (direct sunlight is recommended), keep the grass clean and enjoy the sun.
Low power consumption: infrared detection, high sensitivity, static work without driving the target, low power consumption, work=100mA, standby ≤10μA.
Operating mode:
1. When turned on, the infrared sensor will detect moving objects and trigger ultrasonic waves, which is inaudible to humans. However, some outdoor small animals such as dogs, cats, mice and squirrels will be able to hear and be driven away.
2. When it is turned on, the red indicator light is on, and it emits a harsh sound for 2 seconds (people can hear it), and ultrasonic waves are emitted at the same time, but the product will have a small click sound after 15 seconds, it will automatically go out and enter Standby mode
3. In standby mode, there will be two restart modes: 1. It will automatically restart after about 8 minutes; 2. If there is an animal within the sensing range of the ultrasonic driver, it will start immediately. The start-up mode is the same as the start-up, a harsh sound and ultrasound will be emitted for 2 seconds.
Package Included:
1 * Solar Ultrasonic Animal Repeller
Tips:
1. For best results, keep the repelling head about 9-10 inches off the ground.
2. Please choose the place where the solar panel on the top can get as long as possible sunshine.
3. Please tear off the plastic sheet that protects the solar panel to ensure charging efficiency.
4. Please install the equipment according to the direction of use of the animals to achieve better results.
5. Before the first use, please charge it in the sun for 2-3 hours.
6. If you want to check whether the equipment is working normally, please keep the equipment running for a week or more instead of a day or a few hours.
Please note:
1. Allow the animal rejector to run continuously for best results.
2. Do not immerse the repeller in water or use it in heavy rain
3. Do not cover the PIR sensor.
4. Please clean the repeller, please use a damp soft cloth and mild soapy water. Do not use harsh chemicals or abrasive cleaners that can damage the repeller.
5. Humans can hear part of the sound. Therefore, keep the equipment as far away as possible from where humans live. Do not install the equipment in children's and baby playgrounds.